About Me

Hello! I'm Amanda Woodman.
I'm glad to present to your attention my page. There are several posts in my blog. I'm looking forward to your questions. Contact me: mail@directmoviestar.com

Tips On Installing a Garage Door Weather Seal

People possessing homes with garages attached to them care about having the same thermal conditions in the house and the garage. The matter is that if any of these areas has extreme difference in temperature, the warmth can escape making both spaces cooler or even colder. If you can easily understand that your garage is much colder than the house to which it is attached, it's better to solve this problem as soon as possible.

But how can the garage lose its warmth your may ask? Well, usually it happens due to the space that can be found under your garage door. as a result, the warmth from your house escapes through this space making your garage and, consequently, house cooler. But don't get at a loss as there are simple ways to terminate your space. One of the most efficient ones is by means of a garage door weather seal that will also give you an excellent opportunity to save on your energy bills each month. So, with these important items you will easily get a comfortable garage and house as a whole.

The process of installation a garage door weather seal is very easy and doesn't require any special skills. However, to perform it, you will need some important items including a garage door weather strip kit. This kit usually contains the nails, but if it doesn't you should get roofing nails. Apart from the garage door weather stripping you'll need to prepare a pencil, a tape measure, and a hammer.

So, let's describe the process of installing a garage door weather seal in detail. First of all, open your garage door in such a way to be able to reach its bottom.

Second, measure the width of your garage door. It has to be mentioned that a garage door weather seal is available in two sizes - 10 feet and 30 feet. If you have got a larger seal than needed, the extra length can be easily cut off with scissors. Nevertheless, to avoid trouble, it's better to accurately measure your door first!

Third, remove current stripping along the edges of the door with the help of a hammer (its end). The hammer will turn out to be useful in taking out nails while a screwdriver will prove to be efficient in taking out the screws. Further, you'll need to find the exact center of the door. For it measure the width of the door and simply divide it in half.

Don't forget to ensure that you mark the center of your garage door with a pencil not to forget where it is! Then, evenly space the nails. You won't need to take the measurements of this part, but check up that the nails are really spaced out equally. After that, you'll need to locate the garage door weather stripping along the garage. Don't be in a hurry to cut off anything that seems to you to be extra.

Start from the right side of your garage door and make your way until it meets the left side. Only now you can use your scissors to trim off extra material. Finally, hammer the nails or screws into your garage door. In this way, your garage and the house as a whole will be securely protected from any strong wind or heavy rain for many years to come.

So, if you're not quite satisfied with your garage and would like to improve its thermal state and male it more comfortable, consider installation of a garage door weather seal. To purchase a high-rate garage door insulation kit visit Tim's website http://www.diygaragedoorinsulation.com. This website will also provide you with the precious information on making your garage a constituent part of your home. Forget about wasted money on heating and use your space correctly.